Bathroom Plumbing Services — Repair, Installation & Remodels in Bonita Springs Florida

Bathroom plumbing repair costs vary based on the problem—a simple faucet cartridge replacement might be $150-$300, while a full valve replacement could be $400-$800. A toilet replacement typically runs $300-$600. For leak repairs, cost depends on location and severity; finding and fixing a small supply line leak might be $200-$500, while more complex drain or hidden leaks could be higher. We charge for diagnosis upfront (usually $75-$100), and that cost is credited toward your repair if you proceed. For remodels, we provide a detailed estimate based on your specific layout and fixture plan.

Common causes include worn valve cartridges, corroded pipes (especially in older homes with polybutylene), improper slopes in drain lines, and deteriorated supply line connections. Signs of a bathroom leak include: water stains on ceilings or walls below the bathroom, soft spots in floors, musty smells, visible water dripping, or unexplained increases in your water bill. Hidden leaks are the most dangerous—they cause mold and structural damage before you notice. If you suspect a leak, have it inspected immediately. We use moisture detection and video inspection to locate leaks without opening walls.

It depends on the scope of work but one full bathroom remodel with a new shower, toilet, vanity, etc will be less than a week in most cases. Sometimes a few days.

Florida requires permits for most plumbing work, especially supply line and drain installation. Some fixture replacements (like a toilet or faucet) might be permit-exempt depending on your county, but unpermitted work can create title issues when selling your home. We handle all permit requirements and coordinate inspections. For remodels, bathroom plumbing is inspected as part of the overall remodel permit. Ask about permits when you call—we’ll advise what’s required for your specific situation.

Immediately turn off the water supply at the shut-off valve (usually under the sink). If the flood is from a burst supply line, turn off your main water valve. For a toilet overflow, turn off the water valve behind the toilet. Once water is stopped, assess the damage—wet towels, call your water damage restoration company if needed, and remove standing water. Once the emergency is under control, call us to diagnose the cause and make repairs. Many bathroom floods are preventable with proper maintenance and early attention to leaks.